Silvercrest SWC 1000 D1 Kurzanleitung Seite 11

NOTE
No user action is required to switch the product between
►
50 and 60 Hz. The product adapts automatically to either
50 or 60 Hz.
First use
■ Before taking the appliance into use ensure that ...
– the appliance and its accessory parts are in perfect working condition,
– all packaging materials have been removed.
Attachment fitting / removal
WARNING! RISK OF INJURY!
► After operation, the appliance components may be hot!
Fitting Attachments
Insert the desired attachment into the attachment insertion slot 1, so that
■
the front arrow symbol on the attachment points at the arrow symbol on the
attachment insertion slot 1
■ Turn the attachment clockwise until it clicks into place. The back arrow on the
attachment now points at the arrow on the attachment insertion slot 1
Removing attachments
■ First switch the appliance off and allow it to coosl down.
Press the release button "push" 7 and turn the attachment anti-clockwise
■
■ The attachment can now be removed by pulling it out of the attachment inser-
tion slot 1.
Switching on/off / Selecting a heat level
■ When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch 3 and select the output level:
– "0"
– "1"
– "2"
You switch the appliance off by sliding the level switch 3 to the position "0"
■
(= appliance off).
■ 8 │ GB │ IE
The appliance is switched off
for a reduced air-flow strength with heat
for a high air-flow strength with heat
.
SWC 1000 D1
.
.