Storing The Device When Not In Use; Troubleshooting; The Milk Frother Is Not Working; The Milk In The Canister Won't Froth - Silvercrest IAN 276999 Bedienungsanleitung

SilverCrest SMA 500 B1
WARNING of damage to property
After cleaning and before using the device again, ensure that the contact area on the
underside of the canister (7) is absolutely dry and free from any detergent residue. If
not, placing the canister (7) on the base (11) can cause a short circuit, which in turn
will result in a defective milk frother.

9. Storing the device when not in use

If the milk frother is not going to be used for a longer period of time, store it in a safe, clean and dry
place.

Before storing the device, clean it thoroughly as described in the previous section.

10. Troubleshooting

If your milk frother does not work as usual, use the following instructions to try and solve the
problem. If working through the following tips does not eliminate the fault, please contact our
hotline (see the 'Warranty information' section).

10.1. The milk frother is not working


The plug is not inserted. Insert the plug into the power socket.

The power socket is faulty. Try the milk frother in another power socket that you know definitely
works.

The milk frother is not switched on. Press the On/Off button (10) to switch on the milk frother.

The milk frother has overheated and the overheating protection is preventing the device from
switching on. Wait until the milk frother has cooled down. Pour milk up to the MIN marking
inside the milk frother.

10.2. The milk in the canister won't froth


Check whether whisk B (5) is inserted. Insert whisk B (5), if necessary.

Whisk B (5)
whisk B (5) up to the stop on the whisk drive shaft.
16 - English
is not securely in place on the whisk drive shaft. Push