Inhaltsverzeichnis
Werbung
GENERAL
1 General
Please read these operating instructions carefully and thoroughly before using the high load tool for the first time. In
particular, observe the security advice in Chapter 2. These operating instructions must always be readily accessible to
every user.
GB
1.1 Application
The Senco High Load Coilnailer SHLCN90 is an coilnailer with a magazine for high load coils.
It is used for permanent installation in equipment or production lines, e.g. in prefabricated houses (intended use). The
system is not an independent part and has to be connected with other parts to complete the whole as a machine. The
safety of all hazards must exclude the result from the management and operation of the system. The system clock cannot
be used for vertical movements. Lowering the positioning is possible.For security reasons please
use only staples stated in "Technical Data".
1.2 Technical Data
Description
Order number
Recommened fasteners
Magazine capacity
Size H x L x W
Weight
Noise
Air pressure useage
Air pressure hose
Issue cycle
Driving power
Max. Air pressure
Operating pressure
4
4
SHLCN90
EM07200
HL Ring coil BJ-, BL-,
HL-, HD-, GL- *****P
50-90mm
3000 Nails
453 x 687
x 179 mm
10kg
97,5 dB (A)
1260 l/min at 6bar
12 mm hose connection
via hose coupling
(subpackage)
max. 7 Nails /second
Compressed air
8,3 bar (120 psi)
5-7 bar
Werbung
Kapitel
Inhaltsverzeichnis
