General; Range Of Application; Technical Data; Delivery Contents - Senco SNS50 Betriebsanleitung

GENERAL

Please read this instruction manual carefully and in its entirety before initial operation of the stapler. Pay particular attention
to the safety instructions in chapter 2.
This instruction manual must always be on hand for every user.
GB

1.1 RANGE OF APPLICATION

The SNS50/SQS55 Wegmatik stapler drives staples into panel-shaped building materials such as chipboard, gypsum fibre-
boards, OSB boards etc. for assembly on wooden frames (intended use)

1.2 TECHNICAL DATA

For your own safety, use only the staples listed in the technical data.
SPECIFICATIONS
Model
Article No.
Weight
Dimensions (L x W x H)
Type of trigger
Trigger sequence
Trigger safety mechanism
Driving energy
Compressed air connection
Permissible max. operational pressure
Recommended operational pressure
Air consumption per operation process
Permissible operational items
Magazine capacity [unit]
Noise levels:
According to Doc. No. CEN/TC 255 WG1
N 45.3
Vibration levels:
According to ISO 8662-11/e
Recommended lubricant

Delivery contents

4
SNS50
EJ02000
10.5 kg
310 mm x 340 mm x 430 mm
Automatic
Depending on distance
yes, in roller
Compressed air
3/8" NPT
8.3 bar
6.0...7.0 bar
3.1 l at 6 bar
Staple type N, LN (32...63 mm) Q, LQ (38.... 63 mm)
130
L 99 dB
WA, 1s, d
L 93 dB
PA, 1s, d
2.4 m/s
2
If there is no maintenance unit, oil the air
inlet on the stapler with SENCO pneuma-
tic oil; under normal operational conditions
5-10 drops, twice daily, are enough.
Stapler, limit stop and clamping arm for
guide rails,
2 guide rollers (replacement), Allen key 4
mm, instruction manual
SQS55
EJ01900
160