Kobra CYCLONE Betriebsanleitung Seite 34

IMPORTANT!
WHAT TO DO IN CASE OF A PAPER JAM
(PLASTIC WASTE BAG IS NOT INFLATED BY THE TURBINE AIRFLOW AND THE SHREDDED
MATERIAL DOES NOT GET INTO THE PLASTIC WASTE BAG).
If the machine is overloaded with too much paper (or other material) or in case the operation of the
machine is terminated while the machine is still shredding, the machine could run into a jam. Usually
a paper jam is due to some paper blocking the rotating blades (jammed paper between the first
blade and the screen) or shredded paper clogging the turbine exit. The machine is basically jammed
when the plastic waste bag does not inflate or the blades do not rotate.
In order to clear the paper jam follow these steps:
1. Remove the paper from the shredding chamber and make sure that the blades are free to rotate
2. Open turbin cover (Fig.17) and remove the shredded paper clogging the turbine exit.
3. Press the START button without introducing any material into the machine and check If the
plastic waste bag inflates.
Fig. 17
KOBRA Cyclone 32 DI-129/13/14.04.2022