Kobra CYCLONE Betriebsanleitung Seite 33

OPERATION
IMPORTANT!
Before starting any shredding operation and before any material is
introduced into the Cyclone the following points must be carefully
checked:
1. When the "START" button is pressed the Cyclone main motor starts
and the plastic bag must be inflated by the turbine airflow.
2. The Cyclone must shut itself off after approximately 30-40 seconds
(in case adjust the "ALARM C" knob located in the electrical panel
board, see "Electrical Set-up and Tuning" section attached to this
manual, pag.77-82).
KOBRA Cyclone 31 DI-129/13/14.04.2022