Silvercrest TS 53BC Gebrauchsanleitung Und Sicherheitshinweise Seite 80

78 GB/IE
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 78 437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 78
Restoring the device to its
factory settings
You can delete all of the data saved on the device,
e.g. settings or saved measurements, by restoring the
device to its factory settings.
Proceed as follows:
Remove the batteries from the device.
To do this, open the battery compartment cover
Press the ON/OFF/MEASURE button
Keep it pressed down for 10 seconds whilst you
insert the batteries back into the device.
Release the ON/OFF/
MEASURE button
again once DEL ap-
pears in the display.
Remove the batteries
again.
Now all of the saved data on the device has been de-
leted and the device is restored to its factory settings.
Note: If you have reset the device to factory settings,
you must remove it from the Bluetooth settings on your
smartphone to be able to connect it again.
8
.
3
.
8
15.06.23 14:22 15.06.23 14:22