Silvercrest TS 53BC Gebrauchsanleitung Und Sicherheitshinweise Seite 74

72 GB/IE
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 72 437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 72
The measured value
appears on the display
and the end of the
measuring process is in-
dicated by a short beep
(when the key tone is activated). When the measure-
ment type symbol stops flashing, the next measure-
ment can be taken. This takes approx. 5 seconds.
If the measured value lies within the normal range
(< 38 °C (100.4 °F)), the LED above the display
will light up green for 3 seconds. If the measured
value is higher than this (≥ 38 °C (100.4 °F =
fever)), the LED will light up red.
If you have activated Bluetooth
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
during transfer.
Note: The "HealthForYou" app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter "transferring
measured values".
The device will switch off automatically after 30
seconds (if no Bluetooth
or press the ON/OFF/MEASURE button
5 seconds to switch it off.
Clean the device after every use as described in
the chapter "Cleaning and care".
data transfer, the
®
connection is available)
®
®
for
8
15.06.23 14:22 15.06.23 14:22