Silvercrest TS 53BC Gebrauchsanleitung Und Sicherheitshinweise Seite 75

437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 73 437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 73
Measuring object temperatures
To switch on the multi-function thermometer, press
the ON/OFF/MEASURE button
second.
Then press the MEM button
ton at the same time for 3 seconds to change
6
to the object temperature mode. appears on
the LC display.
Point the sensor tip
towards the object or
the liquid to be meas-
ured (never immerse in
liquids!) at a distance of
3 cm and press the ON/OFF/MEASURE button
or the MEASURE button (forehead measure-
8
ment) for 1 second.
5
Release the
selected button.
The measured
value appears
on the display
and the end of measurement is indicated with a
short beep (when the key tone is activated). When
the measurement type symbol stops flashing, the
next measurement can be taken. This takes approx.
5 seconds.
To leave object temperature mode, hold down the
MEM button
7
same time for 3 seconds or switch the device off
using the ON/OFF/MEASURE button
and the SET but-
7
3 cm
and the SET button
for one
8
at the
6
.
8
GB/IE 73
15.06.23 14:22 15.06.23 14:22