ULTIMATE SPEED USBD1 A1 Bedienungsanleitung Seite 44

˜ Troubleshooting
Problem
The display does
[ 1 ]
not light up when both
clamps / are
[ 7 ] [ 8 ]
connected to the vehicle
battery.
˜ Cleaning and care
m DANGER! Risk of electric shock!
Do not immerse the product in water or
other liquids. Never hold the product
under running water.
Do not allow water or other liquids to
enter the interior of the product.
m NOTICE! Risk of damage! Do
not use abrasive, aggressive cleaning
agents or hard brushes.
Clean the housing with a soft dry cloth.
o
˜ Storage
Clean the product before storage.
o
Store the product in the original
o
packaging when it is not in use.
Store the product at a dry location out
o
of the reach of children.
˜ Disposal
The packaging is made entirely of
recyclable materials, which you may
dispose of at local recycling facilities.
44 GB/IE
Possible cause
The red clamp and the
7 ] [
black clamp are not
8 ] [
connected to the correct poles.
The vehicle battery terminal
posts are oxidized or badly
corroded.
The vehicle battery is empty.
Product:
The product and packaging materials are
recyclable and are subject to extended
producer responsibility.
Dispose them separately, following the
illustrated Info-tri (sorting information), for
better waste treatment.
The Triman logo is valid in France only.
Solution
Connect the red clamp
and the black clamp
the correct poles.
Have the vehicle battery
serviced.
Charge the vehicle battery.
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and
numbers (b) with following
meaning: 1–7: plastics/20–22:
paper and fibreboard/80–98:
composite materials.
7 ] [
to
8 ] [