ULTIMATE SPEED USBD1 A1 Bedienungsanleitung Seite 43

˜ Setup
(Fig. H)
˜ Setup
1. Select Setup.
2. Confirm the selection.
˜ Fn
INFO: Fn acts as the shortcut key of
battery test or waveform.
1. Press Fn
.
[ 3 ]
2. Confirm: Press OK
3. Select Battery Test or Waveform
as a shortcut.
˜ Language
1. Select Language.
2. Confirm the selection.
3. Select between different languages:
Press or
2 ] [
˜ Beep
INFO: The status of the buzzer can be
set to ON or OFF.
1. Select Beep.
2. Confirm the selection.
3. Set the status of the buzzer to ON or
OFF.
INFO: The screen of the product may vary in different EU countries.
.
4 ] [
.
5 ] [
˜ Brightness
1. Select Brightness.
2. Confirm the selection.
3. Set the brightness bar: Press
.
[ 5 ]
˜ About
1. Select About.
2. Confirm the selection. Software and
hardware version are shown.
˜ Notes on battery testing
If the product detects that the
o
temperature of the battery could have
an influence on the result: The product
asks to select whether the ambient
temperature is above or below 0 °C.
After the selection is made: The test
continues.
To obtain a more decisive result: The
o
produkt asks whether you want to test
the battery before or after charging.
If the vehicle has just been driven, select
BEFORE CHARGING.
or
[ 2 ]
GB/IE 43