Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Engine stop lever
It cuts out power to the machine at the end of working or when a problem occurs. If, for any reason, the
handlebars are released from the operator's hands, it will automatically adopt its original position and thus
stop the engine.
Gear Shift Lever
It is used to select forward and reverse direction as shown on the selector.
Operation Handle Lock Nut (Lock Nut for Height Adjustment)
To regulate the height of the handlebar, loosen lock nut, adjust handlebar to the desired position, and then
fasten the lock nut.
Cover Lock Bolt (Lock Bolt for Side Adjustment)
Loosen lock pin, adjust handlebar to the desired position, and then secure the lock bolt.
PTO Rod
It is a front locking 3-teeth implement. It rotates clockwise, independently from the gear, and depending on the
engine speed.
Quick Coupler
It is used to change the optional implements on the carrier rapidly.
Throttle lever
The throttle lever controls engine speed. Moving the throttle lever in the directions shown makes the engine
run faster or slower.
Wheel Clutch Control Lever
It is used to STOP the wheel.
Handlebar
Driving position is comfortable with the controls positioned ergonomically. The handlebars are adjustable in
height, sideways and are reversible by 180o. Special silent-blocks absorb the vibrations produced by the
machine when in operation.
Werbung
