Progress PBP23101X Benutzerinformation Seite 9

Setting a heating function
1. Turn the knob for the heating functions
to select a heating function.
2. Turn the control knob to select the
temperature.
The lamp turns on when the oven
operates.
3. To turn off the oven, turn the knob for
the heating functions to the off
position.
CLOCK FUNCTIONS
Clock functions table
Clock func‐
tion
TIME OF
DAY
DURATION
END
TIME DELAY
MINUTE
MINDER
Application
To show or change the
time of day. You can
change the time of day
only when the oven is off.
To set how long the oven
works. Use only when a
heating function is set.
To set when the oven
turns off. Use only when
a heating function is set.
Combination of DURA‐
TION and END function.
Use to set a countdown
time. This function has
no effect on the operation
of the oven. You can set
the MINUTE MINDER at
any time, also if the oven
is off.
Heat-up indicator
When the oven function operates, the bars
in the display appear one by one when
the temperature in the oven increases,
and disappear when it decreases.
Clock func‐
tion
00:00
COUNT UP
TIMER
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Press or
2. Press to confirm and set the
minutes.
The display shows
"00" flashes.
3. Press or
minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
Progress 9
Application
If you do not set any oth‐
er clock function the
COUNT UP TIMER auto‐
matically monitor how
long the oven works.
It is on immediately when
the oven starts to heat.
The Count Up Timer can‐
not be used with the
functions: DURATION,
END.
and "12:00".
to set the hours.
and the set hour.
to set the current
again