Scope Of Delivery; General Notes; Installation Staff; Symbols Used - Maico EVN 22 Montageanleitung Und Bedienungsanleitung

gb │ Table of contents
Table of contents
1. Scope of delivery .................................... 10
2. General notes......................................... 10
3. Product information ................................ 10
4. Environmental conditions and
operating limits ....................................... 11
5. Technical data ........................................ 11
6. Safety instructions .................................. 11
7. Installation preparations ......................... 13
8. Installation .............................................. 13
9. Maintenance........................................... 15
10. Cleaning ............................................... 15
11. Fault rectification .................................. 15
12. Spare parts........................................... 16
13. Dismantling .......................................... 16
14. Disposal ............................................... 16
15. Wiring diagrams ................................... 25

1. Scope of delivery

Connecting flange with socket spanner,
internal housing, shutter Bag of accessories
with 4 screws (M5 x 50), 4 lock nuts, tension
relief and cable grommet Installation and
Operating Instructions

2. General notes

Read these installation and opera-
ting instructions carefully before
using the fan for the first time.

Follow the instructions. Keep these
instructions safe for use later on.

2.1 Installation staff

Installation is only permitted when carried out
by trained specialists.
Only qualified electricians are permitted to
make the electrical connections. They are
trained in electrical engineering and are
aware of the risks and consequences of
an electric shock.
10

2.2 Symbols used

Direct risk of danger. Failure to
observe will result in severe
DANGER
injury or death.
Possibly dangerous situation
which could result in minor to
CAUTION
moderate injuries.
NOTICE Possible situation which could
cause damage to the product or
its surroundings.
INFO symbol indicating
important information and tips.
●
Bullet point for information on the
corresponding subject.
Instructions. Follow the
1.
instructions given in the order
stated.

3. Product information

3.1 Unit overview, fig. B to G
1 Shutter, complete
2 Connecting flange
2.1 Motor
2.2 Impeller
2.3 Servomotor (actuator)
3 Internal housing
4 Terminal box cover
5 Gluing point
6 Screw (M5 x 50)
7 Connecting cable shutter EVN 22 R
8 Lock nut
9 Socket spanner (width across flats 8, red)
10 Tension relief
11 Terminal block, 3-pin or 7-pin
12 Sealing EVN 22 and EVN 22 R
13 Pull-cord switch EVN 22 P
Tx cable grommet (T1 or T2)
P production date (stamp)
S window cut-out or wall cut-out
Acknowledgements: © Maico Elektroapparate-Fabrik
GmbH. English translation from the original German
Operating Instructions. We cannot be held responsible
for mistakes or printing errors and retain the right to make
technical modifications without giving prior notice
.