cecotec CONGA 8490 ULTIMATE ULTRA POWER HOME Bedienungsanleitung Seite 73

The robot
vacuum cleaner
does not resume
cleaning
The robot
vacuum cleaner
is always offline
The connection
between the
smartphone and
the robot vacuum
cleaner failed
Self-emptying base
Problem
The self-
emptying base
flashes in red
No indicator light
turns on
6. TECHNICAL SPECIFICATIONS
Product: Conga 8490 Ultimate Ultra Power Home
Input: 20 V ⎓, 0.6 A
Product reference: EU01_100082
Rated: 14.4 V ⎓
Make sure the robot vacuum cleaner is not in Sleep mode, as it will
not resume cleaning in this mode.
When manually placed in the self-emptying base, the robot will not
resume cleaning.
Make sure the robot vacuum cleaner is successfully connected to a
2.4 GHz network and always in areas with good Wi-Fi signal.
Make sure the robot vacuum cleaner and the self-emptying base
are in an area with good Wi-Fi signal, reset the router, and retry
connection.
Possible cause and solution
The dirt-disposal bag is not installed or incorrectly fitted. Check that
the bag is correctly fitted.
The dirt-disposal bag is full or the dirt collection channel is blocked.
Check if the dirt-disposal bag is full and if so, replace it with a new
one. If the issue persists, check for foreign objects blocking the dirt
collection channel of the self-emptying base. If so, unscrew the
transparent cover and remove the obstruction.
The fan of the self-emptying base doesn't start. Frequent dust
collection can lead to overheating of the fan guard or failure. It is
recommended to wait 30 minutes before resuming use.
No power supply or damaged plug. Make sure the self-emptying base
is connected to the mains and that the plug isn't damaged. Should
the latter occur, please contact the official Cecotec Technical Support
Service.
CONGA 8490 ULTIMATE ULTRA POWER HOME
ENGLISH
73