cecotec CONGA 8490 ULTIMATE ULTRA POWER HOME Bedienungsanleitung Seite 66

ENGLISH
Functions
Pause
While the robot vacuum cleaner is operating, press the Start/Pause button on the robot
vacuum cleaner or select it in the app to pause the cleaning process. Press the Start/Pause
button on the robot vacuum cleaner or on the app to resume the cleaning process.
Standby
The robot vacuum cleaner will automatically enter standby mode after 10 minutes of inactivity.
Press the Start/Pause button on the robot vacuum cleaner or in the app to activate it again.
Cleaning modes
The robot vacuum cleaner includes different modes and functions that can be toggled from
the app.
In addition, in every one of the cleaning modes on the app, you will be able to select the Turbo
mode on carpets, which activates the maximum suction power when the robot vacuum cleaner
detects a carpet.
Edge mode
- When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
- Press the edge cleaning mode in the app.
Spiral mode
- When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific area.
It will start cleaning at a specific spot and will move outwards in a spiral motion, and it will
return to the starting spot in an inwards spiral motion again.
- Once finished, the robot vacuum cleaner will return to the self-emptying base directly.
- Before using this mode, place it in the spot you wish to clean.
- Select the spiral cleaning mode on the app.
Square Spiral mode
- When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific area.
It will start cleaning at a specific spot and will move outwards in a square-spiral motion,
and it will return to the starting spot in an inwards square-spiral motion.
- Once finished, the robot vacuum cleaner will return to the self-emptying base directly.
- Before using this mode, place it in the spot you wish to clean.
- Select the spiral cleaning mode on the app.
Scrubbing Mode
- Attach the mop to the bracket and the latter to the mixed tank. Fill up the water tank.
- Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode and
scrubbing level in the application: off, low, medium, or high.
66