Parkside PTS 710 B2 Bedienungsanleitung Und Originalbetriebsanleitung Seite 8

The following warnings are used in the user manual, on the packaging and on the rating label:
Read the instruction manual .
Follow the warnings and safety notes!
Risk of electric shock!
Maximum depth cut
CE mark indicates conformity with
relevant EU directives applicable for
this product .
ELECTRIC PLUNGE SAW
˜ Introduction
We congratulate you on the purchase of your
new product . You have chosen a high quality
product . The instructions for use are part of the
product . They contain important information
concerning safety, use and disposal . Before using
the product, please familiarise yourself with all
of the safety information and instructions for use .
Only use the product as described and for the
specified applications . If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it .
Warnings and symbols used
Switch off the product and disconnect
it from the mains before making any
adjustments, performing maintenance,
cleaning and when the product is not
in use .
Protection class II (double insulation)
Alternating current/voltage
Direct current/voltage
Safety information
Instructions for use
˜ Intended use
This electric plunge saw (hereinafter "product" or
"power tool") is suitable for sawing longitudinal
and cross cuts in a plunge cut into firmly
supported following materials:
Solid wood
Chip board
Plywood
Aluminium
Tiles
Stone
Plastics
Lightweight construction materials
GB 7