Installation Instructions; Unpacking; Water Supply Connection - AFG ECO 400 Bedienungsanleitung

INSTALLATION ISTRUCTIONS
WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY
PRIOR TO INSTALLING & OPERATING THE MACHINE.
INCORRECT INSTALLATION MAY RESULT IN INJURY OR DAMAGE
TO PROPERTY AND COULD ALSO INVALIDATE YOUR WARRANTY.
INSTALLATION SHOULD ONLY BE CARRIED OUT BY A COMPETENT ENGINEER

Unpacking

Take suitable precautions and due care whilst
unpacking and moving the machine. Remove
all outer packaging and protective film from
the outer panels. In the first instance it is ad-
visable to keep the packaging intact to one
side.
Contents
- Wash baskets.
- Wash Arm.
- Cutlery baskets.
- Water inlet hose.
- Plate stand.
- 4 Adjustable feet.
- Pressure reducing valve – to fit over the
solenoid.
- Installation / Owners manual.
- Test Certificate.
- Rinse weights & filters.
- Deflector plate.
- Filters
IN ACCORDANCE WITH CURRENT REGULATIONS.
Installation
- Ensure that the area in which the machine is
to be installed is adequate in terms of space,
access to services and that it is cable of safely
supporting the machines fully laden weight.
Level the machine
- To ensure proper operation the unit must be
level – side to side and front to back. The adjust-
able feet can be turned using pliers to raise or
lower the machine accordingly.
Wash Arm Connection
- Place the circular splash guard over the centre
boss and carefully attached the threaded centre
boss. Secure with the retaining nut already at-
tached to the centre boss. If present the top arms
will already be attached.

Water supply connection

- All plumbing connections must comply with
all applicable national, state and local plumbing
codes. –Make sure that the water supply line
29