Unpacking; Installation Instructions - AFG ECO 500 Handbuch

INSTALLATION INSTRUCTIONS

WARNING
INCORRECT INSTALLATION MAY RESULT IN INJURY OR DAMAGE
TO PROPERTY AND COULD ALSO INVALIDATE YOUR WARRANTY.
INSTALLATION SHOULD ONLY BE CARRIED OUT BY A COMPETENT ENGINEER

Unpacking

PLEASE NOTE: The ECO 500/ECO 500 AP has
an open base to allow the heavy duty wash
pump to ventilate. Please take extra care when
removing the machine from the pallet and posi-
tioning on site.
Take suitable precautions and due care whilst
unpacking and moving the machine. Remove
all outer packaging and protective film from the
outer panels. In the first instance it is
advisable to keep the packaging intact
to one side.
Contents
- 2 Wash baskets.
- Wash Arm.
- Cutlery Basket.
- Water inlet hose.
- 4 Adjustable feet.
- Pressure reducing valve – to fit over
the solenoid, if needed
- Installation / Owners manual.
- Test Certificate.
- Detergent weights & filters.
- Deflector plate.
- Filters.
PLEASE READ THESE INSTRUCTIONS CAREFULLY
PRIOR TO INSTALLING & OPERATING THE MACHINE.
IN ACCORDANCE WITH CURRENT REGULATIONS.
Installation
- Ensure that the area in which the machine is
to be installed is adequate in terms of space,
access to services and that it is capable
of safely supporting the machines fully laden
weight.
Level the machine
- To ensure proper operation the unit must
be level – side to side and front to back.
The adjustable feet can be turned using pliers
to raise or lower the machine accordingly.
Wash Arm Connection
- Place the circular splash guard over the
centre boss and carefully attached the bottom
wash arm to the threaded centre boss. Secure
with the retaining nut already attached to
the centre boss. If present the top arms will
already be attached.
14