Technical Data - AFG ECO 400 Bedienungsanleitung

Technical Data

Rachs per hour 30
Wash temperature 55 °C
High temperature rinse 72 °C bis 90 °C (Adjustable)
Water comsumption Approx 2 to 3 litres at 3 bar
Wash pump 450 W (0,6 hp)
Wash tank heater 1800 W
Rinse booster heater 2700 W
Wash tank capacity / Booster heater capacity 16 litres / 5,5 litres
Wash chamber height 290 mm
Machine weight 41 Kg
Electrical requirements 1 x 230 V / 50 Hz
Water size 3/4 "
*Flow pressure (Minimum) 2-4 bar
Incoming temperature (min. / max.) 6 °C / 25 °C
Drain size (mm) Ø 25 mm for ECO 400 / Ø 18 mm for ECO 400 AP
Drain height Floor height for ECO 400 / Max. 700 mm for ECO 400 AP
*Should water pressure be too low, we recommend to install a booster pump.
*Should it be too high, we recommend installing a pressure reducing valve to the inlet.
Please Note:
Always refer to the machine dataplate for specific electrical and water requirements.
The material provided here is for reference only and may be subject to change without notice.
Dimensional Drawing for Model ECO 400/400AP
A / B / C –On the back side of machine
A –Water Injet
B –Feeding Cable
C –Water Exaust
24