AFG ECO 400 Bedienungsanleitung Seite 26

Technical Data
Rachs per hour 30
Wash temperature 55 °C
High temperature rinse 72 °C bis 90 °C (Adjustable)
Water comsumption Approx 2 to 3 litres at 3 bar
Wash pump 750 W ( 1 hp)
Wash tank heater 2200 W
Rinse booster heater 6000 W
Wash tank capacity / Booster heater capacity 32 litres / 8 litres
Wash chamber height 320 mm
Machine weight 59 Kg
Electrical requirements 3 x 400 V+N 50Hz / 3 x 230 V Possibility of connection at 230 V upon specific requirement.
Water size 3/4 "
*Flow pressure (Minimum) 2-4 bar
Incoming temperature (min. / max.) 6 °C / 25 °C
Drain size (mm) Ø 32 mm for ECO 500 / Ø 18 mm for ECO 500 AP
Drain height Floor height for ECO 500 / Max. 700 mm for ECO 500 AP
*Should water pressure be too low, we recommend to install a booster pump.
*Should it be too high, we recommend installing a pressure reducing valve to the inlet.
Please Note:
Always refer to the machine dataplate for specific electrical and water requirements.
The material provided here is for reference only and may be subject to change without notice.
Dimensional Drawing for Model ECO 500/500AP
A / B / C –On the back side of machine
A –Water Injet
B –Feeding Cable
C –Water Exaust
26