AFG ECO 400 Bedienungsanleitung Seite 28

Rachs per hour
Wash temperature
High temperature rinse
Water comsumption
Wash pump
Wash tank heater
Rinse booster heater
Wash tank capacity / Booster heater capacity
Wash chamber height
Machine weight
Electrical requirements
Water size
*Flow pressure (Minimum)
Incoming temperature (min. / max.)
Drain size (mm)
Drain height
*Should water pressure be too low, we recommend to install a booster pump.
*Should it be too high, we recommend installing a pressure reducing valve to the inlet.
Please Note:
Always refer to the machine dataplate for specific electrical and water requirements.
The material provided here is for reference only and may be subject to change without notice.
Dimensional Drawing for Model ECO 1000
A –Water Injet
B –Feeding Cable
C –Water Exaust
Technical Data
A / B / C –On the back side of machine
28
40/20
55 °C
72 °C bis 90 °C (Adjustable)
Approx 2 to 3 litres at 3 bar
750 W ( 1 hp)
4500 W
6000 W
55 litres / 9 litres
430 mm
110 Kg
3 x 230 V / 400 V+N 50Hz
2-4 bar
6 °C / 25 °C
Ø 32 mm
Max. 500 mm
3/4 "