Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pag. 20 di 28
E
N
G
L
I
S
H
RX91/A
with code learning system and coupling code ACG5005
RX91/A
with code learning system and terminal board code ACG5004
RX433/A
with code learning system and coupling code ACG5055
RX433/A
with code learning system and terminal board code ACG5056
RX433/A 2CH with code learning system and coupling code ACG5051
RX433/A 2CH with code learning system and terminal board code ACG5052
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention not to let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91 code. ACG5454
SPARK ANTENNA 433 code. ACG5252
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
MECHANICAL STRIP L=2MT - 6,56 FEET
With double-safety contact, you can cut the length you need.
INSTALLATION KIT for gates weighting up to a 600Kg / 1300lbs
PLATE TO BE CEMENTED
NYLON RACK MODULE 4, with zinc plated angle Iron, In 1mt. bars.
Ideal for gates up to 1,000Kg / 2,200lbs weight
code: ACS9000 1mt / 3,28"
code: ACS9001 10mt / 32,8" (1mt/3,28" x 10)
RADIORECEIVERS
SPARK ANTENNA
code: ACG3010
code: ACG4655
code: ACG8107
Rack of model 4 with zinc plated angle Irons, in2mt - 6,56 feet bars code: ACS9050
Ideal for gates weighting more than 1,000Kg / 2,200lbs.
NYLON OLIVE
FIT SYNCRO PHOTOCELLS for the wall-installation - code:ACG8026
The range you can set Is 15÷30mt 49÷100"
You can fit many couples close together thanks to the synchronising circuit.
Add the SYNCRO TRANSMITTER, code: ACG8028, for more than 2 photocells couples
(up to 4)
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
ACG7059
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILD-IN
The gasket shall be fitted only at the end of the installation, before you mount
the case.
Fit the gasket
Close the case
ACG4010
7 - FINAL OPERATION
The gasket is fitted
Motor ready
code: ACG8051
code.:ACG1053
code.:ACG1048
Werbung
Inhaltsverzeichnis
