Power Supply Via Power Loop Cables - G&D DVI-FiberLink Installationsanleitung

Power supply via power loop cables

If the external power pack connected to the Power In interface supplies the expansion
module with power, power loop cables can be used to supply up to four other expan-
sion modules with power.
1. Connect the external power pack  to one of the expansion modules.
2. Insert a Power Loop cable  into the Power Loop interface of the expansio mod-
ule. Connect the other end to the Power In interface of the next expansion mod-
ule.
3. If desired, repeat step 2 to establish the power supply to the third, fourth or fifth
expansion module.
Power supply via power loop cables





DVI-FiberLink · 14