Displaying Status Information - G&D DVI-FiberLink Installationsanleitung

Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
3. Use the provided service cable to connect the Service port of an expansion module
to one of the computer's USB ports.

Displaying status information

How to display status information within the terminal emulator:
1. Start the terminal emulator.
2. Load the connection settings of the setup menu and start the connection.
3. Press the key within the terminal emulator.
R
As soon as a connection has been established, the setup menu is shown within
the terminal emulator:
Setup Menu for DVI-FiberLink
Show Firmware Info
Show Fiber Line Info
Show CAT5 Line Info
4. Use the arrow keys
Show Firmware Info:
Show Fiber Line Info:
Show CAT5 Line Info:
5. Press to show the information in the terminal emulator.
Enter
The desired information (see next page) are shown in the setup menu. If
necessary, press the
6. Press the key to return to the main menu.
Q
115.200
8
none
1
none
to go to the desired row of the setup menu:
show firmware version of the expansion module
show status values of the transmission module
show various information regarding the four wire pairs
of the twisted pair cable.
key to update the information.
R
Displaying status information
...
...
...
DVI-FiberLink · 16