Overview Of Information To Be Displayed - G&D DVI-FiberLink Installationsanleitung

Displaying status information

Overview of information to be displayed

The different menus show you the following information:
FIRMWARE INFO
FW:
FIBER LINE INFO
This menu shows information regarding the SFP (Small Form-factor Pluggable) module. This
module is used to established a connection to the second expansion module.
SFP Status:
SFT Vendor:
SFP ID:
Temperature:
Voltage:
BiasCurrent:
Tx Power:
Rx AV-Power:
CAT5 LINE INFO
This menu shows information regarding the twisted-pair connection to the matrix switch or the
DVICenter component.
Pair:
Status:
Dist. (m):
Skew (ns):
Pol:
17 · DVI-FiberLink
Version number of installed firmware
Status
Vendor
Type designation
Temperature (°C)
Voltage (V)
Standby current(mA)
Transmission power (dBm/mW)
Received power (dBm/mW)
Number of pair (1 to 4)
proper cable connection
 OK:
interrupted cable connection
 open:
estimated distance between expansion module and component
skew between the signals of the pair
damaged or incorrectly wired cable
 neg:
proper cable connection
 OK: