Parkside Performance PABSP 20 Li C3 Bedienungs- Und Sicherheitshinweise Seite 43

Keep the product at least 20 cm from
pacemakers or implantable cardioverter
defibrillators, as the electromagnetic radiation
may impair the functionality of pace makers.
The radio waves transmitted could cause
interference in hearing aids.
Do not place the product near flammable
gases or potentially explosives areas (e.g.
paint shops) with the wireless components
on, as the radio waves emitted can cause
explosions and fire. The range of the radio
waves varies by environmental conditions.
In the event of wireless data transmission,
unauthorised third parties receiving the data
cannot be excluded.
Operating system updates
In order to keep the product up to date,
u
it is necessary that you always keep the
operating system of your smartphone and/
or tablet PC up to date.
Update the operating system regularly.
u
˜ Before first use
˜ Accessories
To operate this product safely and correctly,
the following accessories, i.e. accessories and
accessory tools, are necessary:
Suitable drill bits
o
Suitable driver bits
o
Cooling lubricant (cutting oil) suitable for
o
drilling in metal
Suitable personal protective equipment
o
Cross tip screwdriver
o
Accessories and accessory tools are available
through your authorised dealer. When buying
always consider the technical requirements of this
product (see "Technical data").
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
NOTE
This instruction manual contains information
u
and suggestions for several accessory
tools and their uses. The accessory tools
depicted are not included in the shipment
(see "Scope of delivery"), but are meant
to indicate additional possibilities for using
this product.
m WARNING!
Do not use accessories not recommended
u
by Parkside. This may result in electric shock
or fire.
Suitable battery packs and chargers
Battery pack: Parkside X 20 V Team
Charger: Parkside X 20 V Team
NOTE
The Lidl Home app supports the
u
operating systems iOS 9.0, Android 5.0 or
higher.
This battery pack is compatible with other
u
products in the Lidl Smart Home range.
˜ Positioning the battery
charger
The battery charger
o
free-standing or mounted on a wall.
Wall mounting
1. Drill 2 holes in the wall with a spacing of
76.2 mm.
2. Place 2 dowels into the holes.
3. Place 2 round-head screws with screw head
diameter of 7 to 8 mm into the dowels. Leave
the screw head protruding at a distance of
approx. 8 mm from the wall.
can be used either
[ ]
GB/IE 41