Scheppach MS150-46E SE Original Bedienungsanleitung Seite 42

15. Troubleshooting
The following table shows fault symptoms and de-
scribes remedial measures in the event of your ma-
chine failing to work properly. If you cannot localise
and rectify the problem with this, please contact your
service workshop.
Fault
Loud while running, machine
vibrates heavily
Engine does not start
Engine runs unsteadily
Uneven mowing results
Unsatisfactory bagging of
the grass
42 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Possible cause
Screws are loose
Blade fasteners are loose
Blade is unbalanced
Brake lever not pressed
Spark plug is defective
Fuel tank is empty
Contaminated fuel
Cold environment
Engine faulty
Air filter is soiled
Spark plug is soiled
Blade is blunt
Cutting height is too low
Cutting height is too low
Blade is worn
Basket is clogged
Remedy
Check screws
Check blade fasteners
Replace blade
Press brake lever
Replace spark plug
Refill with fuel
Empty fuel tank and fill with clean fuel
Push the primer button (if present)
Contact authorised customer service
Clean the air filter
Clean the spark plug
Sharpen the blade
Set correct height
Set correct height
Replace the blade
Empty the basket