Ironing Recommendations; Use - Cleanmaxx SG5509S8 Gebrauchsanleitung

Ironing Recommendations

• Check before ironing whether the garment which is to be ironed has a label with
ironing instructions on it and follow them. Otherwise choose the correct temperature
based on the type of fabric. The recommended temperature and steam settings are:
Label
Synthetics (e.g. nylon, viscose), silk, velvet
Wool
Cotton
Linen
Not suitable for ironing
• Delicate items of clothing should be ironed inside out.
• Sort the items of clothing based on the ironing temperature and start with the gar-
ments which require the lowest temperature. If you reduce the temperature on the
device, wait a few minutes until the bottom of the iron has cooled down slightly before
you continue ironing.
• For an optimum ironing result, we recommend that you dry-iron the fabric after steam-
ironing it in order to remove the moisture from it.

Use

CAUTION!
• Although the iron has an automatic safety switch-off function, you should still pull the
mains plug out of the plug socket after ironing or during any prolonged pauses in or-
der to prevent personal injury or damage to property. Never leave the iron unattended
while it is connected to the mains power and keep children away from it.
• Never attempt to iron clothes while somebody is wearing them.
• Never aim the steam directly at people, animals or plants. This can cause severe
scalding.
• Danger of injury! Only hold the device by the handle when you are operating it.
• Only iron on a stable, fl at, heat-resistant and moisture-resistant surface. We recom-
mend that you use a standard ironing board.
• Do not iron on surfaces made from glass or plastic.
• Always work with suffi cient lighting.
• Always test the device fi rst on a small, inconspicuous spot on the clothing.
• Be aware of damage caused by fi re! Never iron on one spot for too long. Never leave
the hot bottom of the iron standing on the fabric or another heat-sensitive surface!
• Do not iron over zips, studs, clips etc. to prevent any scratching of the ceramic coat-
ing on the bottom of the iron.
• Open the water reservoir cover only to fi ll the water reservoir. Otherwise keep the
cover closed while operating the iron.
23
Material Steam
Temperature
•
0
••
••• 1
MAX 3
EN