Cleanmaxx SG5509S8 Gebrauchsanleitung Seite 19

• Do not operate the device in a very damp environment or in the
vicinity of combustible material.
• Immediately after ironing, place the still hot device down a mini-
mum distance of 15 cm away from walls, furniture and other
objects.
• Always check the device for damage before putting it into op-
eration. Only use the device if it along with the mains cable and
plug have no signs of damage!
• In the event of damage/faults, switch the device off immediately.
• Do not make any changes to the device. Also do not replace
the mains cable yourself. Only ever have repairs to the device,
cable and plug carried out in a specialist workshop. Contact
the customer service department if necessary. Incorrect repairs
may pose considerable risks to the user.
• Be aware of damage caused by fi re! Never iron on one spot for
too long. Never leave the hot bottom of the iron standing on the
fabric or another heat-sensitive surface!
Avoiding Damage to Material, Property and the Device
• Make sure that the mains cable is not squashed, bent or laid
over sharp edges and does not come into contact with hot sur-
faces.
• Only iron on a stable, fl at, heat-resistant and moisture-resistant
surface. We recommend that you use a standard ironing board.
• Do not iron on surfaces made from glass or plastic.
• Always work with suffi cient lighting.
• Never exceed the maximum fi ll level (note MAX marking on the
water reservoir!). If possible, only fi ll the device with distilled
water.
• Never pour any descaling or cleaning agent or other chemical
additives into the device. This may destroy the device and safe
working is no longer guaranteed.
• Open the water reservoir cover only to fi ll the water reservoir.
Otherwise keep the cover closed while operating the iron.
• Never cover up the steam nozzles and do not stick any objects
into them.
19 EN