ProMinent DULCOFLEX DFYa Schnellstartanleitung Seite 9

Assembly
Note this assembly information:
You need to access the dosing head
to change the hose. Therefore, ensure
that there is sufficient room around the
pump, a minimum of 280 mm.
NOTE
Install the pump free-standing to
change the hose.
Assembly of the pump
To attach the pump to a base surface,
use screws with a diameter of < 8
mm to screw both sides of the pump
through the fixing holes provided.
≥ 280 mm ≥ 100 mm
100 – 230 V ±10%
50/60 Hz
* available in other designs and lengths
EN
9