Siemens RVL482 Installationsanleitung Seite 39

Setting elements
1
2
3
4
5
6
7
1 Operating mode buttons (selected button is lit)
2 Display (LCD)
3 Buttons for operating the display:
Prog = selection of operating line
– + = adjustment of displayed value
4 Button for "Close heating circuit mixing valve" or reduce modulation, or burner stage 2 ON/OFF in manual operation
5 Button for "Open heating circuit mixing valve" or increase modulation in manual operation
6 Button for manual operation
7 LEDs for:
Manual operation
/ Heating circuit mixing valve opens / burner modulation actuator opens / burner stage 1 ON
/ Heating circuit mixing valve closes / burner modulation actuator closes / burner stage 2 ON
Pump runs
8 Button for d.h.w. heating ON/OFF (ON = button lit)
9 Sealing facility in the cover
10 Info button for the display of actual values
11 Setting slider for flow temperature setpoint at an outside temperature of –5 °C
12 Setting slider for flow temperature setpoint at an outside temperature of 15 °C
13 Setting knob for readjustment of room temperature
14 Fixing screw with sealing facility
Building Technologies
8
9
10
11
12
13
14
74 319 0619 0 a 17.04.2008
en
39/288