To Replace The Blades Of The Product; To Clean The Product - Meec Tools Rmc300E20V Übersetzung Der Originalanleitung

7.1 To replace the blades of the
EN
product
WARNING! Push the power swich to stop the
SV
product and let all moving parts come to a complete stop
before you replace the blades of the product.
NO
WARNING! Screws that are damaged, worn, or
cannot be tightened properly must be replaced.
PL
WARNING! The blades are sharp. Wear protective
gloves to prevent injuries.
DE
● The blades have a service life of up to 2 months if the
product operates daily.
FI
● After the new blades are installed, make sure that the
blade disc can move freely.
FR

7.2 To clean the product

NL
WARNING! Push the power swich to stop the
product and let all moving parts come to a complete stop
before you clean the product.
● Clean the cover of the product with a damp cloth. Use
a mild detergent If necessary.
● The blade disc can be cleaned water with a pressure
not higher than 1 MPa.
14