To Change The Pin Code; To Change The Start Time; To Change The Daily Mowing Period; To Change The Number Of Mowing Days Per Week - Meec Tools Rmc300E20V Übersetzung Der Originalanleitung

4.5 To change the PIN code

1
Push and hold the "START" and "HOME" buttons at
the same time for 3 seconds. The symbol for the
password setting and "PIN 1" will flash on the
display.
2
When the first position for the code flashes, push
the "START" or "HOME" button to select the first
number of the old PIN code. Then push the "OK"
button. The next position of the code will flash.
3
Set all the numbers of the old PIN code. "PIN 2"
will flash on the display.
4
When the first position of the code flashes, push
the "START" or "HOME" button to select the first
number of the new PIN code. Then push the "OK"
button. The next position of the code will flash.
5
Set all the numbers of the new PIN code. "IDLE"
will be shown on the display.

4.6 To change the start time

The default start time is 09.00.
1
Push and hold the "START" and "OK" buttons at
the same time for 3 seconds.
2
When "O" flashes on the display, push the "START"
or "HOME" button to select the start time. Then
push the "OK" button. "IDLE" will be shown on the
display.
4.7 To change the daily mowing
period
The default mowing period is 8 hours per day. The
mowing period can be set to 1–24 hours.
1
Push and hold the "OK" button for 3 seconds. The
set mowing period will be shown at the display
and the first number flashes.
2
Push the "START" or "HOME" buttons to select the
applicable time. Then push the "OK" button. "IDLE"
will be shown on the display.
4.8 To change the number of
mowing days per week
The default number of mowing days per week is 5 days.
The mowing days per week can be set to 3, 5, or 7 days.
1
Push and hold the "START" and "OK" buttons at
the same time for 3 seconds.
2
When the set number of mowing days flashes on
the display, push the "START" or "HOME" buttons
to select the applicable number of mowing days
per week. Then push the "OK" button. "IDLE" will
be shown on the display.
5

Transport

WARNING! Push the power swich to stop the
product before you lift or move it.
● During product operation, push the "STOP" button and
then the power switch to stop the product before you
lift or move it.
● Lift the product by the handle to make sure that the
blades are directed away from you.
● In vehicles, transport the product in its original
packaging, if possible.
6

Storage

● Put the product in a clean and dry place, where
children and pets do not have access.
● Put the product in a dry area, protected from direct
sunlight and wet conditions.
● Stop the product by the power switch when the
product is not in use or put into winter storage.
7

Maintenance

WARNING! Push the power swich to stop the
product and let all moving parts come to a complete stop
before you do maintenance to the product.
● Examine the product regularly to make sure that all
nuts, bolts and screws are tightened.
● Examine the product regularly to make sure that the
blades, blade bolts and cutter assembly are not worn
or damaged. If necessary, replace worn and damaged
parts.
Note! If the blades or bolts are worn or damaged, the
complete set must be replaced to prevent to make sure
the product is balanced.
● Keep the product and its wheels clean to get the best
mowing results.
● To prolong the battery life, charge the battery every 3
months if the product is not in use for a long period of
time.
EN
SV
NO
PL
DE
FI
FR
NL
13