Operation; Status Indicators Guide; To Do Before You Operate The Product; To Operate The Product - Meec Tools Rmc300E20V Übersetzung Der Originalanleitung

4
Stop the mowing mode and make sure that the
EN
product returns along the perimeter wire to the
charging station.
SV
4

Operation

NO
WARNING! Push the "STOP" button to stop the
product before it is moved from or in the mowing area.
PL
WARNING! The product operation must be moni-
tored if there are children or pets in the mowing area.
DE
4.1

Status indicators guide

Indicator
FI
Steady green
FR
Flashing green
NL
Flashing red
No indicator
4.2 To do before you operate the
product
● Make sure that the perimeter wire is correctly installed.
Refer to "3.3 To do a function test" on page 11.
● Inspect the mowing area regularly and remove stones,
wires and other foreign objects.

4.3 To operate the product

WARNING! All the blades of the product can move
when one of the blades is turned. Risk of personal injury.
1
Push and hold the power switch until the product
starts.
12
Description
The perimeter wire is correctly
connected and the battery of the
product is fully charged.
The battery of the product is
charging.
The perimeter wire is not correctly
connected.
1. Make sure that both ends of the
perimeter wire are connected to the
terminals of the charging station.
2. Make sure that there the
perimeter wire is not damaged or
folded.
There is no power supply to the
product.
1. Make sure that the power cable is
correctly connected to the charging
station.
2. Make sure that the power adapter
is correctly connected to an
applicable and live power outlet.
2
Enter the PIN code.
Note! If the wrong PIN code is entered 10 times, a sound
is heard and then product stops.
Note! The product will automatically stop if there is no
input in 30 seconds after the power switch is pushed.
3
Push the "START" button and then the "OK" button.
The product operation starts.
Note! The product operation continues until the battery
level is low. The product will then go to the charging sta-
tion. The product operation starts again when the battery
is fully charged or at the next scheduled start time.
4
To stop the operation and send the product to the
charging station, push the "HOME" button and
then the "OK" button.

4.4 To set the date and time

Note! The year, month, day and time must be set correct-
ly to for the mowing schedule to be correct. The correct
sequence is year, month, day, and time.
1
Push and hold the "START" button for 5 seconds.
The time setting symbol and the positions for year
will flash on the display.
2
Push the "START" or "HOME" button to select the
year and then push the "OK" button. The time
setting symbol and the positions for month and
day will flash on the display.
3
When "O" flashes at the position for month, push
the "START" or "HOME" button to select the month.
Then push the "OK" button.
4
When "O" flashes at the position for day, push the
"START" or "HOME" button to select the day. Then
push the "OK" button. The time setting symbol and
the position for hour and minute will flash on the
display.
5
When "O" flashes on the display, push the "START"
or "HOME" button to select the hour and minute.
Then push the "OK" button. "IDLE" will be shown
on the display.