Product Overview; Safety; Safety Definitions; Safety Instructions For Operation - Meec Tools Rmc300E20V Übersetzung Der Originalanleitung

EN
Do not burn the battery
SV
Do not soak the battery in water.
NO
PL
Fuse must be replaced with rating
specified on the product label.
DE
Discarded product must be recycled
according to current regulations.
FI
This product complies with applicable EU
FR
directives and regulations.
NL
Recycle as electrical waste.

1.4 Product overview

Figure 1
1. Display
2. Power switch
3. Start button/Increase value
4. Home button/Decrease value
5. OK button
6. Transport handle
7. Cutting height adjuster
2

Safety

2.1

Safety definitions

WARNING! If you do not obey these instructions,
there is a risk of death or injury.
CAUTION! If you do not obey these instructions,
there is a risk of damage to the product, other materials
or the adjacent area.
Note! Information that is necessary in a given situation.

2.2 Safety instructions for operation

Warning! If you do not obey these instructions,
there is a risk of death or injury.
● Read the warning instructions that follow before you
use the product.
10
● Children above the age of 8 years can use the product
if they are instructed on safe operation and the risk of
hazards. Local regulations can limit the age of the
operator.
● Persons with disabilities can use the product if they
are instructed on safe operation and the risk of
hazards that can occur.
● Do not let children play with the product.
● Do not let children clean or do maintenance to the
product.
● Do not let persons who do not know how to operate
the product to use it.
● Do not let children be in the adjacent area or play with
the product when it operates.
● Do not put objects on the product or the charging
station.
● Do not use the product if the cover or the safety
guards are damaged or not correctly attached.
● Do not lift or move the product when it operates.
● The product must be stopped with the power switch
before a blockage is removed.
● The product must be stopped with the power switch
the before it is examined, cleaned or maintenance is
done to it.
● The power switch must not be bypassed.
● Do not use the product if the power switch is
damaged.
● Do not use the product if you are tired, ill or under the
influence of alcohol, drugs or medicine. This has a
negative effect on your vision, alertness, coordination
and judgement.
● Do not use the product if it is damaged.
● Do not change the product.
● The product must only be used for its dedicated
operation.