Wellion AiDEX Sensor Bedienungsanleitung Seite 73

• The recyclable applicator is meant
for single use only. Dispose the used
sensor package and sensor applicator
according to your local regulations.
• Follow the steps described above
carefully and be sure to only use components that are made by
MicroTech Medical. Use of unapproved components can result in
injury.
Removing a sensor
• Remove the old sensor when the PDA/Wellion AiDEX SENSOR app
indicates that the sensor has expired or if you feel any site irritation
or discomfort.
• Carefully pull the tape that holds the sensor to the skin from the
edge and slowly uncover it until the entire sensor is removed. You
can use warm soapy water to remove any remaining sticky residue.
• Press the two locking arms on one side of the sensor base, pull
the transmitter away from the sensor base, and then remove the
transmitter so that it can be used again.
• The sensor is meant for one-time use only.
Dispose the used sensor according to your
local regulations.
EN
73 73