Wellion AiDEX Sensor Bedienungsanleitung Seite 71

• Before application, use alcohol pads to
disinfect your selected skin area and
wait for a minute to let the skin dry.
Change your sensor sites regularly to
avoid discomfort or skin irritation.
• Open the sensor package.
Note: Ensure the sensor is not expired by
checking its expiration date. If the sensor
is expired or the sterilized package is
damaged, please do not use it
• Take out the sensor applicator by turn-
ing it anti-clock wise.
• Place the applicator on the top of the
desired sensor site. Press it firmly against
skin and press the button to launch the
sensor. After inserting the sensor, wait
a few seconds to allow the sensor base
patch to adhere to the skin.
• Remove the applicator. Now, the sensor
should be successfully attached.
EN
71 71