Simons Voss Technologies SmartRelay 2 Kurzanleitung Seite 25

SmartRelay 2
3. Product-specific safety instructions
IMPORTANT
Backup failure due to empty battery
The memory of the SmartRelay AX Classic is powered by a backup bat-
tery in case of power failure. An empty backup battery will result in data
loss in the event of a power failure.
1. If you store the SmartRelay AX Classic for more than a week, re-
2. Replace the backup battery every 10 years. If frequent power failures
4. Connections
NOTE
Connections depending on equipment
The connectors F1, F2, F3 and SVB are used to connect an external card
reader. They are therefore only available in the MH variant.
Code
YL
GN
EN
move the backup battery.
occur, replace the backup battery sooner.
1
Position
Connection of an external antenna: Yellow cable
Connection of an external antenna Green cable
3. Product-specific safety instructions
25 / 108