Stihl RMA 443.3 Gebrauchsanleitung Seite 32

English
8 Handle
The handle is used to hold the lawn mower
when adjusting the cutting height and to
transport the lawn mower.
9 Lever
The lever is used to set the cutting height.
10 Flap
The flap covers the battery.
11 Transport handle
The transport handle is used to transport the
lawn mower.
12 Lock
The lock keeps the side discharge flap
closed.
13 Side discharge flap
The side discharge flap closes off the side
discharge opening.
14 Side discharge opening
The side discharge opening directs the mown
grass to the side.
15 Lever
The lever is used to open and close the inte‐
grated mulch flap.
16 Extension
The extension directs the mown grass to the
ground from the side.
17 Blade
The blade mows and mulches the grass.
18 ECO switch
The ECO switch activates and deactivates
ECO mode.
19 Locking lever
The locking lever keeps the battery in the bat‐
tery compartment.
20 Battery compartment 1
Battery compartment 1 holds the battery.
21 Battery compartment 2
Battery compartment 2 holds a replacement
battery.
22 Battery
The battery supplies the lawn mower with
power.
23 Button
The button activates the LEDs on the battery.
It enables and disables the Bluetooth® radio
interface (if present).
24 LEDs
The LEDs indicate the battery charge state
and faults.
# Rating plate with machine number
32
3.2 Symbols
The symbols can be on the lawn mower, battery
or charger and have the following meaning:
Guaranteed sound power level in
L
accordance with Directive 2000/14/EC
WA
in dB(A) for the purpose of comparing
the sound emissions of products.
Set the cutting height.
Grass catcher box level indicator
Lever for opening and closing the
mulch flap.
This symbol identifies the ECO switch.
ECO ECO
1 LED illuminates red. The battery is
too warm or too cold.
4 LEDs flash red. There is a fault in the
battery.
The number beside the symbol indicates
the energy content of the battery according
to the cell manufacturer's specifications.
The available energy content is lower in
practice.
Do not dispose of the product with domes‐
tic waste.
Operate the electric machine in a dry and
closed room.
Read, understand and keep the instruction
manual.
Protection class II power tool
IP symbol
Alternating current
Direct current
3 Overview
Activate the blade.
0478-131-9669-A