MasterCool COMMANDER1100 Bedienungsanleitung Seite 22

4. Open the blue and red valves on the machine. Press next to start the process.
NOTE: Each step in the reclamation process will be displayed with individual progress screens.
Automatic Recovery
The following will be displayed:
Amount of refrigerant being recovered; numerically and in the tank graphic
•
Tank temperature and pressure
•
Amount of waste oil recovered
•
Vehicle pressure
•
Total weight of refrigerant in tank
•
Progress procession graphic on the left of all screens
•
Automatic Vacuum/Leak Test
The COMMANDER default is a 10 minute vacuum/leak test. The vacuum pump will run for 8 minutes pause for 2
minute leak test and resume for an additional 2 minutes of vacuum.
The following will be displayed:
22
COMMANDER2100 screen
www.mastercool.com