MasterCool COMMANDER1100 Bedienungsanleitung Seite 19

To use the COMMANDER2100 (-E)/COMMANDER3100 (-E) in AUTOMATIC MODE please continue below. If manual
mode is preferred (COMMANDER1100 (-E)/COMMANDER2100 (-E)/COMMANDER3100 (-E)) please skip to the
manual section of these instructions.
COMMANDER3100 (-E) MACHINES (ONLY)
Once an automatic or manual procedure is selected, the next screen shown allows for the selection of a standard
or hybrid vehicle.
NOTE: Per SAE J2788, automatic oil injection for hybrid vehicles is prohibited. To inject oil into a hybrid
vehicle, use a manual hermetically sealed oil injector. (Follow vehicle manufacture recommendations)
COMMANDER2100 (-E)/3100 (-E) AUTOMATIC PROCEDURE
AUTOMATIC SCREEN SETTINGS
The COMMANDER2100 (-E)/3100 (-E) automatic screen will display: hose flushing (COMMANDER3100 (-E) only),
recovery, vacuum, leak test, oil inject (COMMANDER2100 (-E) only) and refrigerant charge:
COMMANDER3100 screen
www.mastercool.com 19