MasterCool COMMANDER1100 Bedienungsanleitung Seite 17

•
HELP: The help screen will display all the information about the machine. The machine part number,
brand, model, machine ID, software version, firmware version and database version will be displayed.
VISUAL INDICATOR LIGHTS:
The COMMANDER machines are equipped with visual indicator LED lights to inform on the progress of the machine.
(COMMANDER2100 (-E), COMMANDER3100 (-E) only)
RED: No connection between USB and computer command center. Contact customer service.
•
BLINKING RED: Procedure alarm. Contact customer service.
•
YELLOW: No communication between computer command center and PC board. Contact customer
•
service.
BLINKING YELLOW: User attention needed to perform function displayed on screen.
•
BLUE: Machine in operation process.
•
GREEN: Process completed.
•
COMMANDER MACHINE INITIAL SET-UP
FILLING OIL INJECTION BOTTLES ON THE MACHINE (COMMANDER2100 (-E): The COMMANDER2100
•
(-E) has two fresh oil bottles marked: Bottle # 1 and Bottle # 2. To fill the oil injection bottles with
desired oil:
1. Disconnect the quick connect couplers on the oil bottles.
2. Unscrew the top cap only .
3. Fill the oil bottles with desired oil. Do not overfill.
4. Replace the caps securely. Push the bellow from the bottom until a little amount of oil comes out.
(This will reduce any air from being injected into the A/C system.) Connect the quick connects.
5. Replace the fresh oil bottles in their corresponding locations, ensure that the oil hoses are not
bent and do not touch the back wall behind the bottle.
www.mastercool.com 17