MasterCool COMMANDER1100 Bedienungsanleitung Seite 11

FILLING VACUUM PUMP WITH OIL:
1.
2.
3.
4.
5.
6.
Pressing NEXT on the bottom of the screen will display last and total refrigerant recovered, refrigerant
charge, and oil injection.
The values on the left side of the screen will display the last amount of recovered refrigerant,
refrigerant charged and oil injected. The values on the right side of the screen display the lifetime totals
of recovered refrigerant, refrigerant charged and oil injected.
SETTINGS: This will allow the user to customize the time/date, language, units, wifi and printer of the
•
COMMANDER machine.
Open the side maintenance door to access the vacuum pump.
Remove the red cap on top of the vacuum pump.
Empty the oil bottle contents into the vacuum pump.
Verify the oil fill; the oil should meet the oil fill line on the vacuum pump sight
glass.
Replace red cap and clean any excess oil.
Press reset after oil change to zero out the timer.
www.mastercool.com 11