Inserting A Sound-Muted Section While Recording (Record Muting); Playback Operations; About The Display - Sony PCM-R300 Bedienungsanleitung

Recording Operations

Playback Operations

Inserting a Sound-Muted
Section While Recording
(Record Muting)
Use Record Muting to insert a space of about 0.5 to 9.5
seconds between tracks.
For details on setting the duration of the blank space,
see "Menu Operations" ("REC MUTE") on page 19.
PLAY "
INPUT AMS REW FF
= + 0 )
SELECT DATA
ANALOG OPT COAXIAL
STOP PLAY PAUSE
POWER "
p P
PAUSE P
Press REC MUTING R where you want to insert a
space while the deck is recording or in recording
pause.
The REC indicator in the display starts flashing and
tape transport continues, but no signal is recorded.
After inserting a space, the REC and P indicators in
the display stay on and the deck changes to recording
pause.
To insert a blank space (of a duration different from
that preset by menu setting)
Hold down the REC MUTING R button as long as you
want.
When you release the REC MUTING R button, the
REC and the P indicators stay on and the deck changes
to recording pause.
When the preset duration has passed, the REC
indicator begins to flash faster and the MARGIN
indication shows how long the REC MUTING R
button has been pressed.
To insert a blank space of a duration shorter than
the preset value
Press REC r while the REC indicator is flashing. The
deck starts recording again.
To resume recording
Press PAUSE P or PLAY ".
Note
If you do not create a sound-muted section at the beginning
of a tape, you may not be able to move or erase a start ID
(see page 15) that is recorded within 2 seconds from the
beginning of the tape.
12 EN
REC MUTING R
MARGIN ID
RESET AUTO RENUMBER REHEARSAL
g
WRITE ERASE
MODE RESET
MENU ENTER
ID MODE REC MODE SBM
STANDARD
REC MUTING REC OPEN/CLOSE START 48 kHz
ON
6 STOP 44.1kHz
R r OFF
END LONG
REC r
Playback Operations

About the Display

You can use the display to show the tape running time,
absolute time, playing time of the track, remaining
time on the tape, error rate, and menu display.
INPUT AMS
= +
ANALOG OPT COAXIAL SELECT
STOP PLAY
POWER "
p
REC LEVEL
Press MODE (or COUNTER MODE on the remote).
5
4 6
3 7
2 8
Each time you press the button, the display changes as
1 9
0 10
CH-1 (L) CH-2 (R)
follows.
PHONES PHONE LEVEL
MIN MAX
Absolute time
Playing time
a)
of the track
Remaining
time on
b)
the tape
Tape running
time
Error rate
counter c)
Menu display
a) The playing time of the track will not be displayed when
the "P-TMDISP" is set to "--" (see page 20).
b) In the case of a premastered tape, the remaining time is to
the end of the recorded portion.
c) Numeric characters appear only during playback. During
recording or pause, the counter shows "ER ---- ----." For
details on the error rate counter, see "Notes on the error
rate counter" on page 13.
d) Menu display appears only when the deck is empty,
stopped, or paused. For details on how to access various
menu settings, see "Menu Operations" on page 19.
To reset the tape running time
Press RESET (or COUNTER RESET on the remote).
MARGIN
RESET AUTO RENUMBER
g
WRITE
REW FF MODE RESET
0 )
DATA MENU ENTER
ID MODE REC MODE
STANDARD
PAUSE REC MUTING REC OPEN/CLOSE START 48 kHz
6 STOP 44.1kHz
P R r
END LONG
MODE RESET
ABS TIME
8 20
m s
√
Press
3 15
PGM TIME
m s
√
Press
REMAINING
1 00
h m
√
Press
5 19
m s
√
Press
ER -- -- -- - -
√
Press
-- ME NU --
d)
Press
REC LEVEL
ID
5
REHEARSAL 4 6
3 7
2 8
ERASE
1 9
0 10
CH-1 (L) CH-2 (R)
SBM PHONES PHONE LEVEL
ON
OFF
MIN MAX