Scheppach PM1200 Originalbetriebsanleitung Seite 25

- Up to three waste electrical devices per type of
device, with an edge length of no more than 25
centimetres, can be returned free of charge to
the manufacturer without prior purchase of a new
device from the manufacturer or taken to another
authorised collection point in your vicinity.
- For additional take-back conditions of the man-
ufacturers and distributors, please contact the
respective customer service.
• In the case of delivery of a new electrical device by
the manufacturer to a private household, the latter
may arrange for the free collection of the old elec-
trical device upon request from the end-user. Get in
contact with the manufacturer's customer service.
• These statements only apply to devices installed
and sold in the countries of the European Union
and which are subject to the European Directive
2012/19/EU. Different provisions may apply to the
disposal of electrical and electronic appliances in
countries outside the European Union.
15. Troubleshooting
Problem
Engine does not run.
Engine does not reach
full power.
Motor overheats
easily.
Unusual vibrations.
Possible causes
Engine, cable or connector defective,
fuses burnt.
Circuits in the network are overloaded
(lamps, other motors, etc.).
Overloading of the engine, insufficient
cooling of the engine.
Stirring paddle defective.
Stirring shaft defective.
Wrong mixture.
www.scheppach.com
Remedies
Have the machine checked by a specialist.
Never repair the engine yourself. Attention!
Check the fuses and replace them if necessary.
Do not use any other devices or engines on the
same circuit.
Avoid overloading the engine during mixing and
remove dirt from the engine to ensure optimum
engine cooling.
Replace stirring paddle.
For troubleshooting, contact the manufacturer
or a company designated by the manufacturer.
Wrong processing Follow the manufacturer's
working instructions.
GB | 25