Scheppach DBS800 Originalbetriebsanleitung Seite 26

14. Troubleshooting
Problem
Engine does not run.
Engine does not reach
full power.
Motor overheats easily.
26 | GB
Possible cause
Engine, cable or connector
defective, fuses burnt.
Circuits in the network are
overloaded (lamps, other engines,
etc.)
Overloading of the engine,
insufficient cooling of the engine.
www.scheppach.com
Remedy
Have the machine checked by a specialist.
Never repair the engine yourself. Attention!
Check the fuses and replace them if
necessary.
Do not use any other devices or engines on
the same circuit.
Avoid overloading the engine during grinding
and remove dust from the engine to ensure
optimum engine cooling.