Deactivate/shutting down devices
1. Keeptheon/offswitch(13)pressed
until the charge level indicator (14) is
no longer lit.
After the device has been
switched off, the cutting unit
continues to rotate for some
time. Allow the cutting unit to
come to a complete stop.
Keep hands and feet at a
safe distance! Risk of injury!
Remove grass cuttings regularly
from the spool cap to make sure
that cutting is not impaired.
Speed control
Youcanvarythespeedby
pressing the button (9).
The current selection is indicated by
the illumination of the small light.
Setting3=7000rpm
Setting2=5500rpm
Setting1=4600rpm
ThedeviceswitchestoECOmode
when the mounted tool is not under
load. This reduces the motor speed.
Whenloaded,thedeviceautomati-
cally switches back.
Operation
Checking the charge status
of the batteries
The battery charge level indicator (12)
shows the state of charge of the battery
(20).
The charge level of the battery is indicated
byilluminationofthecorrespondingLED
lights(3LEDsperchargelevelindicator
when the device has been activated at the
on/off switch (13).
3 LEDs illuminated (red, orange and green):
Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
Chargethebattery(20)whenonly
theredLEDonthechargelevelin-
dicator (14) is illuminated.
Working instructions
Work safely, giving due con-
sideration to the next steps!
• Whenstrimming,payattentiontocoun-
try-specificregulationsand/orthoseof
your local municipality.
• Do not do strimming work during gen-
eral rest periods.
• Soliditemssuchasstones,metalparts
and similar are to be removed. These
can be ejected and lead to personal
injury or damage to property.
• When strimming high bushes or
hedges,theworkingheightshouldbe
at least 15cm. This means that animals
like hedgehogs are not put at risk.
• Always hold the device tightly and se-
curely with both hands!
• Only cut grass and weeds! Watch out
forrootsortreestumps,thereisarisk
of tripping.
• Work carefully and do not endanger
anyone while you are strimming.
• Youshouldonlyworkingoodlighting
conditionswithsufficientvisibility!
GB
MT
53