General Safety Instructions For Power Tools - Parkside Performance Ppfsa 40-Li B2 Originalbetriebsanleitung

GB MT
Remove the batteries from
the device before mainte-
nance and adjustment
work
Do not use metal saw
blades
Guaranteed sound power
level
LWA
Electrical­devices­must­not­be­
disposed of with domestic
waste.
Charge­level­indicator
Display of the speed steps
Soft key for speed level
selection
Smart­LED
On/Off switch
Symbols in the manual
Warning symbols with
information on damage
and injury prevention
Warning symbols with
information on the pre-
vention of personal in-
jury caused by electric
shock
­ Instruction­symbols­with­infor-
mation on preventing damage
­Carefully­read­through­the­
user manual
40
indicated in dB
­ Help­symbols­with­information­
on improving tool handling
General safety
instructions for power
tools
WARNING! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock,­fire­and/or­severe­injuries.
Retain all safety directions and in-
structions for future use.
The­term­„power­tool"­in­the­warnings­
refers­to­your­mains-operated­(corded)­
power­tool­or­battery-operated­(cordless)­
power tool).
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered­or­dark­areas­invite­ac-
cidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed