Technical Data - Parkside Performance Ppfsa 40-Li B2 Originalbetriebsanleitung

15a Rotary knob
­ 16­ 2-tooth­blade
17 Allen key
­ 18­ Multi-function­key
19 Release button
20 Rechargeable battery
­ 21­ Charger
22 Shoulder strap
23 Mounting screw
24 Lock
25 Screw
26 Line cutter
27 Shaft mount
28 Receptor
­ 29­ Handle­mount
30 Star screw
31 Uptake spindle
32 Line outlet loop
33 Spool
34 Groove
35 Washer
­ 36­ Clamping­disk
37 Nut
­ 38­ Click­lock

Technical data

40V Cordless
brush-cutter ............ PPFSA 40-Li B2
Motor voltage
­(direct­current);­(2­x­20V)­
U ....... 40 V
Type of battery ................................ Li-ion­
Idle­speed­spindle­n
3 steps ............4600/5500/7000 min
Motor­Idle­speed .....................3500 min
Spool
Cutting­circle .......................... 340 mm
Line thickness ........................... 2.4 mm
Line length ....................................5 m
Thread ........................................ M10
Vibration (a ) at the handle
h
right ...............4.231 m/s
left .................3.911 m/s
.............7000 min
max
;­K=1.5­m/s
2
;­K=1.5­m/s
2
2-tooth­blade
Cutting­circle .......................... 255 mm
Borehole ............................... 25.4 mm
Vibration (a
h
right ...............4.752 m/s
left .................4.677 m/s
Weight (operationally ready
2x­4­Ah­Smart­PAPS­204­A1).........6.4 kg
Weight (without cutting unit) ...........4.8 kg
Sound pressure level at the operator's
) .......... 73.4­dB;­K
workplace (L
pA
Sound power level (L
guaranteed ............................... 90 dB
measured ..........85.2­dB;­K
Temperature...........................max.­50 °C
Charging­process ...................4­-­40 °C
Operation .......................... -20­-­50 °C
Storage .................................0­-­45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .....2400­-­2483.5 MHz
Max.­transmission­power ....... ≤­20­dBm
Levels of noise and vibration were deter-
mined according to the standards and
regulations in the declaration of conform-
ity. Vibration and noise tests have been
carried out successfully in accordance with
EN­50636-2-91.­
Wear hearing protection.
-1
The­specified­total­vibration­value­and­the­
-1
-1
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also be used for a provisional assessment
of the load.
2
2
GB
) at the handle
;­K=1.5­m/s
2
;­K=1.5­m/s
2
)
WA
=­2.31­dB­
WA
MT
2
2
=­3­dB­
pA
37